Hide Table of Contents
esri
esri/arcgis
esri/dijit
esri/dijit/analysis
esri/dijit/geoenrichment
esri/dijit/geoenrichment/ReportPlayer
esri/geometry
esri/layers
esri/opsdashboard
esri/renderers
esri/symbols
esri/tasks
esri/tasks/datareviewer
esri/tasks/geoenrichment
esri/tasks/locationproviders
Class: MapImageLayer
[ AMD Module Require | Legacy Module Require ]
require(["esri/layers/MapImageLayer"], function(MapImageLayer) { /* code goes here */ });
Description
(Added at v2.4)
The MapImageLayer class is used to add georeferenced images to the map. The map will place the georeferenced images at the specified geographic extent. The extent of the image should be within the map's extent. The image should also be in the same coordinate system as the map.Samples
Search for samples that use this class.Class hierarchy
esri/layers/Layer |_esri/layers/MapImageLayer
Constructors
| Name | Summary |
|---|---|
| new MapImageLayer(options?) | Creates a new MapImageLayer object. |
Properties
| Name | Type | Summary |
|---|---|---|
| attributionDataUrl | String | The URL, when available, where the layer's attribution data is stored. |
| className | String | class attribute of the layer's node. |
| credential | Credential | Provides credential information for the layer such as userid and token if the layer represents a resource that is secured with token-based authentication. |
| hasAttributionData | Boolean | When true, the layer has attribution data. |
| id | String | ID assigned to the layer. |
| loadError | Error | Set if the layer failed to load. |
| loaded | Boolean | When the layer is loaded, the value becomes "true", and layer properties can be accessed. |
| maxScale | Number | Maximum visible scale for the layer. |
| minScale | Number | Minimum visible scale for the layer. |
| opacity | Number | Opacity or transparency of layer. |
| refreshInterval | Number | Refresh interval of the layer in minutes. |
| showAttribution | Boolean | When true, the layer's attribution is displayed on the map. |
| suspended | Boolean | When true, the layer is suspended. |
| url | String | URL to the ArcGIS Server REST resource that represents a map service. |
| visible | Boolean | Visibility of the layer. |
| visibleAtMapScale | Boolean | When true, the layer is visible at the current map scale. |
Methods
| Name | Return type | Summary |
|---|---|---|
| addImage(mapImage) | None | Add an image to the map. |
| attr(name, value) | Layer | Adds a new attribute or changes the value of an existing attribute on the layer's node. |
| getAttributionData() | Deferred | Asynchrously returns custom data for the layer when available. |
| getImages() | MapImage[] | Get an array of MapImage objects that define the images in the MapImageLayer. |
| getMap() | Map | Returns reference to the map control the layer is added to. |
| getNode() | HTMLElement | Returns the layer's DOM node. |
| hide() | None | Sets the visibility of the layer to "false". |
| isVisibleAtScale(scale) | Boolean | Returns true if the layer is visible at the given scale. |
| removeAllImages() | None | Remove all images from the layer. |
| removeImage(mapImage) | None | Remove the specified image from the layer. |
| resume() | None | Resumes layer drawing. |
| setMaxScale(scale) | None | Set the maximum scale for the layer. |
| setMinScale(scale) | None | Set the minimum scale for the layer. |
| setOpacity(opacity) | None | Sets the opacity of the layer. |
| setRefreshInterval(interval) | Layer | Changes the layer's refresh interval to the given value (in minutes). |
| setScaleRange(minScale, maxScale) | None | Set the scale range for the layer. |
| setVisibility(isVisible) | None | Sets the visibility of the layer. |
| show() | None | Sets the visibility of the layer to "true". |
| suspend() | None | Suspends layer drawing. |
Events
[ On Style Events | Connect Style Event ]
All On Style event listeners receive a single event object. Additionally, the event object also contains a 'target' property whose value is the object which fired the event.
Events
| Name | Event Object | Summary |
|---|---|---|
| error | {
error: < | Fires when there is a problem retrieving a layer. |
| load | {
layer: < | Fires after layer properties for the layer are successfully populated. |
| opacity-change | {
opacity: < | Fires when the layer opacity has been changed, and returns an object with the opacity value. |
| refresh-interval-change | This event is fired when the layer's refreshInterval is modified. | |
| resume | Fires when a layer resumes drawing. | |
| scale-range-change | Fires when a layer's minScale and/or maxScale is changed. | |
| scale-visibility-change | Fires when a layer's scale visibility changes. | |
| suspend | Fires when a layer suspends drawing. | |
| update | Fires any time a layer has finished loading or updating itself. | |
| update-end | {
error: < | Fires when a layer has finished updating its content. |
| update-start | Fires when a layer begins to update its content. | |
| visibility-change | {
visible: < | Fires when the layer visibility has been changed, and returns an object with a Boolean visible property containing the new visibility value of the layer. |
Constructor Details
Creates a new MapImageLayer object
Parameters:
< |
Optional | Optional parameters. View the Layer object for the list of parameters. |
Sample:
require([
"esri/layers/MapImageLayer", ...
], function(MapImageLayer, ... ) {
var mil = new MapImageLayer({
'id': 'usgs_screen_overlay'
});
...
});
Property Details
<String
StringThe URL, when available, where the layer's attribution data is stored. (Added at v3.1)
<Credential
CredentialProvides credential information for the layer such as userid and token if the layer represents a resource that is secured with token-based authentication. This value is available after the layer has been loaded i.e.
layer.loaded is true. (Added at v2.5)<Boolean
BooleanWhen true, the layer has attribution data. Use the getAttributionData method to retrieve this data as JSON. (Added at v3.1)
Known values:
true | falseDefault value:
false<String
StringID assigned to the layer. If not assigned, esri.Map assigns value. By default, the ID of the layer is "layer" followed by a number. The ID can be user defined only in the layer constructor.
Sample:
- Setting the layer ID in the layer constructor.
require([ "esri/layers/ArcGISDynamicMapServiceLayer", ... ], function(ArcGISDynamicMapServiceLayer, ... ) { var population = new ArcGISDynamicMapServiceLayer("http://myserver/arcgis/rest/population/MapServer/Layers", {id:"population"}); ... }); - Setting the layer ID after a layer is initialized.
population.id = "population";
- Retrieving the layer ID.
function getMapLayers() { for (var j=0, jl=map.layerIds.length; j<jl; j++) { var currentLayer = map.getLayer(map.layerIds[j]); alert("id: " + currentLayer.id); } }
<Error
ErrorSet if the layer failed to load. (Added at v3.9)
<Boolean
BooleanWhen the layer is loaded, the value becomes "true", and layer properties can be accessed. The onLoad event is also fired.
Known values:
true | false<Number
NumberMaximum visible scale for the layer. If the map is zoomed in beyond this scale, the layer will not be visible. A value of 0 means the layer does not have a maximum scale. (Added at v3.1)
Default value:
0<Number
NumberMinimum visible scale for the layer. If the map is zoomed out beyond this scale, the layer will not be visible. A value of 0 means the layer does not have a visible scale. (Added at v3.1)
Default value:
0<Number
NumberOpacity or transparency of layer. Values range from 0.0 to 1.0, where 0.0 is 100% transparent and 1.0 has no transparency.
Known values:
0.0 - 1.0Default value:
1.0<Number
NumberRefresh interval of the layer in minutes. Non-zero value indicates automatic layer refresh at the specified interval. Value of 0 indicates auto refresh is not enabled. (Added at v3.7)
<Boolean
BooleanWhen true, the layer's attribution is displayed on the map. (Added at v3.1)
Known values:
true | falseDefault value:
true<Boolean
BooleanWhen true, the layer is suspended. A layer is considered to be suspended when one of the following is true:
- The layer is hidden.
- The layer is not visible at the current map scale.
- The layer is explicitly suspended by calling the
Layer.suspendmethod.
Known values:
true | false<String
StringURL to the ArcGIS Server REST resource that represents a map service. To obtain the URL, use Services Directory. An example URL for the Street Map service on ArcGIS Online is:
http://server.arcgisonline.com/ArcGIS/rest/services/ESRI_StreetMap_World_2D/MapServer. (Added at v1.2)
http://server.arcgisonline.com/ArcGIS/rest/services/ESRI_StreetMap_World_2D/MapServer. (Added at v1.2)
<Boolean
BooleanWhen true, the layer is visible at the current map scale. (Added at v3.1)
Known values:
true | falseMethod Details
Add an image to the map. The Map Image extent should have the same coordinate system as the map and be within the map's extent.
Parameters:
< |
Required | A MapImage object that defines the image to add to the map. |
Sample:
mil.addImage(mi);
Adds a new attribute or changes the value of an existing attribute on the layer's node. Removes the attribute if the value is
null or undefined. (Added at v3.7)Return type:
LayerAsynchrously returns custom data for the layer when available. (Added at v3.1)
Return type:
DeferredGet an array of MapImage objects that define the images in the MapImageLayer.
Return type:
MapImage[]Returns reference to the map control the layer is added to. Returns
null or undefined if it is not added to a map. (Added at v3.7)Return type:
MapSets the visibility of the layer to "false". The layer is not removed, but it is hidden from view.
Returns true if the layer is visible at the given scale. (Added at v3.1)
Return type:
BooleanParameters:
< |
Required | The scale at which to check if the layer is visible. |
Remove the specified image from the layer.
Parameters:
< |
Required | The MapImage object that defines the image to remove. |
Set the maximum scale for the layer. (Added at v3.1)
Parameters:
< |
Required | The maximum scale at which the layer is visible. |
Set the minimum scale for the layer. (Added at v3.1)
Parameters:
< |
Required | The minimum scale at which the layer is visible. |
Sets the opacity of the layer. Values range from 0.0 to 1.0, where 0.0 is 100% transparent and 1.0 has no transparency.
Parameters:
< |
Required | Value from 0 to 1, where 0 is 100% transparent and 1 has no transparency. The default value is 1. |
Sample:
layer.setOpacity(0.5);
Changes the layer's refresh interval to the given value (in minutes). Non-zero value sets up automatic layer refresh at the specified interval. Value of 0 stops auto refresh. (Added at v3.7)
Return type:
LayerParameters:
< |
Required | Refresh interval of the layer in minutes. Non-zero value indicates automatic layer refresh at the specified interval. Value of 0 indicates auto refresh is not enabled. |
Set the scale range for the layer. If
minScale and maxScale are set to 0 then the layer will be visible at all scales. (Added at v3.1)Sets the visibility of the layer. When true, the layer is visible.
Parameters:
< |
Required | Set the visibility of the layer. |
Event Details
[ On Style Events | Connect Style Event ]
Fires when there is a problem retrieving a layer. Should be used in favor of onError. (Added at v3.5)
Event Object Properties:
< |
ArcGIS Server error message returned in a JavaScript error object. |
Fires after layer properties for the layer are successfully populated. This event must be successful before the layer can be added to the map. Should be used in favor of onLoad. (Added at v3.5)
Event Object Properties:
< |
The loaded layer. |
Fires when the layer opacity has been changed, and returns an object with the opacity value. Should be used in favor of onOpacityChange. (Added at v3.5)
Event Object Properties:
< |
Fires when the layer opacity (transparency) changes. A number property named opacity that indicates the new opacity. Values range from 0.0 to 1.0, where 0.0 is 100% transparent and 1.0 has no transparency. |
This event is fired when the layer's
refreshInterval is modified. (Added at v3.7)Fires when a layer's minScale and/or maxScale is changed. Should be used in favor of onScaleRangeChange. (Added at v3.5)
Fires when a layer's scale visibility changes. The scale visibility changes when a layer is initially visible and becomes invisible because the map scale does not intersect the layer's scale range or vice versa. Should be used in favor of onScaleVisibilityChange. (Added at v3.5)
Fires any time a layer has finished loading or updating itself.
For an ArcGISTiledMapServiceLayer,
the event fires when all required tiles have been retrieved and displayed. For an
ArcGISDynamicMapServiceLayer or
ArcGISImageServiceLayer, the event fires
when the map image has been retrieved and displayed. For a GraphicsLayer,
the event fires when all graphics have been redrawn after a pan or zoom.
Deprecated at v2.0. Use update-start and update-end instead. (Added at v3.6)
Fires when a layer has finished updating its content. It is the responsibility of the subclass to determine when this event is fired. Should be used in favor of onUpdateEnd. (Added at v3.5)
Event Object Properties:
< |
Optional argument. The error object is available when an error occurs during the update. |
Fires when a layer begins to update its content. It is the responsibility of the subclass to determine when this event is fired. Should be used in favor of onUpdateStart. (Added at v3.5)
Fires when the layer visibility has been changed, and returns an object with a Boolean visible property containing the new visibility value of the layer. Should be used in favor of onVisibilityChange. (Added at v3.5)
Event Object Properties:
< |
Fires when the layer visibility changes. A boolean property named visible indicates whether or not the layer is visible after visibility changed. |